Anchorage System
Amorterado
Stainless steel security clips for claddings with mortar. Clip Fix: Ángulo, Recta, “L” Pivote, “Z” Simple y Doble, ECO.
The System FIX Amorterado is based on on single and individual anchor clips installed as security elements for claddings with mortar.
It is a system designed for stone cladding. The System FIX Amorterado is based on on single and individual anchorages installed as security elements for claddings with mortar. The individual system is often used for the cladding of concrete and masonry walls.
Fix Amorteradoclips are made of stainless steel A-2 (AISI-304). This steel offers appropriate values of mechanical strenght and resistance to atmospheric corrosion.
One side of the clips is fixed to a determined support or to the building and the other side, to the stone slab.
In terms of design and properties, addresses the multiple installation requirements. In addition, it has a high degree of compatibility with the wall fixing and also, with the stone fixing.
Composition
Clip Fix Ángulo
The Anchorage Clip FIX Ángulo is fabricated with a gap between the anchorage and the stone axis from 10 millimetres to 30 millimetres. Plate thickness: 1.2 mm.
Clip Fix Recta
The Anchorage Clip FIX Recta is fabricated with a length of 70 and 100 mm and a steel plate thickness of 1.2 mm.
Clip Fix “L” Pivote
The Anchorage Clip FIX “L” Pivote is fabricated with Ø 3 mm steel wire and it is 80 mm length from one side to the pivot.
Clip Fix “Z” Simple
The Anchorage Clip FIX “Z” Simple is fabricated with Ø 2,4 mm steel wire and 70 mm or 100 mm length between each side.
Clip Fix “Z” Doble
The Anchorage Clips FIX “Z” Doble are fabricated with two Ø 2,4 mm steel wires and 70 mm length between each side.
Clip Fix ECO
The Anchorage Clips FIX ECO clips consist of a stainless steel A-2 (AISI-304) M6 threaded rod (lengths: 60, 80 and 100 mm) welded to a 1,5 mm stainless steel A-4 (AISI-316) plate (10×20 and 25×25 mm).